Vidéos d'aide de Screencast
Recherche de vidéos d'aide Close Back
to help

SaintFrag

Profil de membre

SaintFrag

État: -
Contact: Envoyez cet utilisateur un courrier électronique
Membre de: 1 an 18 semaines
Contribution Stats
5
Solutions
16
Fils du forum
53
Commentaires
0
Entrée de blogue
0
Idée
0
Article
0
Vidéo
0
Téléchargement
0
Événement
0
Group Joined

Activité de SaintFrag

Affichez :
commentaire sur la discussion 17 Mai 2013
SaintFrag a commenté : Altiris Image Deployment not attaching to domain.
You may also look at the setup.etl file in the Panther folder.  Load that into event viewer (open saved log).  Also check out event viewer once the machine is accessible.
commentaire sur la discussion 16 Mai 2013
SaintFrag a commenté : PXE-Boot not working
Is your DHCP set up properly?  :)  Check out your scope options on the appropriate VLANs and make sure.  You should see option 60 as PXEClient. You also should have iphelper setup on your switches.
commentaire sur la discussion 16 Mai 2013
SaintFrag a commenté : Altiris Image Deployment not attaching to domain.
Fifteen minutes is quite a long time to have to wait.  Without DeployAnywhere, my clients can logon as soon as they're at the CAD screen.  With DA, GhostUser does the initial logon but reboots.  Again, once the CAD screen is ...
commentaire sur la discussion 16 Mai 2013
SaintFrag a commenté : Problem with Imaging in Deployment Solution
In your unattend file, set computername=@compName This would be in the specialize pass, Shell Setup. Your computer will retain its previous name.
commentaire sur la discussion 09 Mai 2013
SaintFrag a commenté : DeployAnywhere leaves local administrator account disabled
I got it figured out.  I moved my net user administrator /active:yes command from the specialize pass to the oobeSystem pass.
New forum discussion 08 Mai 2013
SaintFrag a publié : DeployAnywhere leaves local administrator account disabled
If I simply check the Include DeployAnywhere option when in the deploy image task, minisetup runs as expected, GhostUser logs in, reboots, and I'm sitting at the login screen ready to roll with all drivers installed. HOWEVER, the local administrator account is ...
commentaire sur la discussion 08 Mai 2013
SaintFrag a commenté : Deployanywhere - USB3.0 devices
The easy work around is to copy the driver's folder to %systemroot%/inf I usually create a folder in there called something like 'MyDriverStore' and copy the required driver's folders from ...
commentaire sur la discussion 21 Mars 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
Okay, I have no idea as to the why, but I created an 80 GB VDI drive instead of 25 GB and it's imaging just fine.  My final image size shouldn't be much larger than 20 GB, but apparently it matters. Thank you everyone for your ...
commentaire sur la discussion 19 Mars 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
Sounds like you are the man I want to talk to!  :) We are trying to do both.  I want to build a basic image on the VBox, capture it, and deploy it to multiple other VBox's to build about 10 other images.  I then need to ...
commentaire sur la discussion 18 Mars 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
No, that wouldn't be the situation here.  It's only a 25 GB virtual disk.  All our physical drives are larger.
commentaire sur la discussion 18 Mars 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
As described before, that's not the route I want to take as it doesn't fit our needs.  I don't have multiple versions of Flash, Java, etc. when all is said and done, I was just using that as an example. I don't have any ...
commentaire sur la discussion 28 Fév. 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
Well, I got the firm error to go away.  I now get an Abort: 40012 error (see attached).  I've also ran firm.exe drives and showdisk -m to verify that the drive was built properly using diskpart (see attached). I'm at a loss ...
commentaire sur la discussion 28 Fév. 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
True, but the commands Altiris uses depend on Firm.exe, which is why I'm using it for my testing of the problem I'm having.  Here is an example of the firm.log error:   -begin ...
commentaire sur la discussion 28 Fév. 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
I have the disk formatted as NTFS and I now have a C: drivein WinPE (per your original thump-on-the-head advice).  I was able to copy a file to it using firm.exe.  However, firm.exe shows the drive as labeled D2P1: instead of PROD:, ...
commentaire sur la discussion 27 Fév. 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
Hmm.... that didn't seem to work.  Any idea how Altiris 'maps' the PROD: drive?  I assume using firm.exe but I can't find any way to do so.
commentaire sur la discussion 27 Fév. 2013
SaintFrag a commenté : VirtualBox and Altiris DS 7.x
Funny, I'd played with DiskPart within the PE environment and never made the connection between creating a partition and the fact that none existed for DS to use.  :)  One of those days!  I'll try that shortly. I've ...
New forum discussion 27 Fév. 2013
SaintFrag a publié : VirtualBox and Altiris DS 7.x
Has anyone had any luck dropping an image an a VirtualBox VM?  I can PXE boot just fine, PE loads, pectagent runs, I see ghost flash, and I get an error about firm.  Basically... Altiris can't see any hard drives.  When I run the command "wmic logicaldisk get ...
commentaire sur la discussion 05 Nov. 2012
SaintFrag a commenté : Reset permissions to default
Hmm... I performed a repair on CMS and that solved the issue. 
New forum discussion 05 Nov. 2012
SaintFrag a publié : Reset permissions to default
While trying to change permission for my level 1 support staff to allow access to initial deployment, I manage to hose permissions completely.  They now get the following error, "You currently do not have sufficient network access rights to the Notification Server ...
commentaire sur la discussion 02 Août 2012
SaintFrag a commenté : Hardware information not populating
That at least gives me a way to find it for now.  May buy the inventory solution, as I saw what was available while we had a trial of that and it's much better 'reporting'. For anyone with the same question: - Manage -> ...